Questions on Separating Mixtures
Multiple-Choice Questions – Separating Mixtures
1. Which method is best for separating iron filings from sand?
A) Filtration
B) Evaporation
C) Distillation
D) Magnetism
E) Decantation
2. What separation technique is used to separate a solid from a liquid using a filter?
A) Filtration
B) Condensation
C) Chromatography
D) Decantation
E) Evaporation
3. Which method is ideal for separating salt from saltwater?
A) Filtration
B) Magnetism
C) Evaporation
D) Decantation
E) Chromatography
4. Distillation is used to separate mixtures based on differences in:
A) Color
B) Density
C) Boiling points
D) Solubility
E) Size of particles
5. To separate oil and water, you would most effectively use:
A) Evaporation
B) Decantation
C) Distillation
D) Chromatography
E) Filtration
6. What method separates ink into its components?
A) Filtration
B) Magnetism
C) Crystallization
D) Chromatography
E) Decantation
7. What method separates sand from water?
A) Decantation
B) Filtration
C) Evaporation
D) Distillation
E) Sublimation
8. A centrifuge is commonly used to:
A) Mix substances
B) Increase boiling points
C) Separate liquids based on boiling points
D) Separate mixtures by density
E) Dissolve solids
9. What is the principle behind crystallization?
A) Solids rise in liquids
B) Liquids evaporate, leaving behind solids
C) Liquids mix homogeneously
D) Gases condense into solids
E) Particles are magnetic
10. What property allows decantation to work?
A) Difference in color
B) Difference in smell
C) Difference in density
D) Similar boiling points
E) Solubility
11. To separate alcohol and water, which method is best?
A) Crystallization
B) Filtration
C) Chromatography
D) Distillation
E) Magnetism
12. The process of boiling a solution to leave behind a solute is called:
A) Filtration
B) Sublimation
C) Chromatography
D) Evaporation
E) Condensation
13. Which separation method involves pouring off a liquid without disturbing the solid?
A) Decantation
B) Filtration
C) Chromatography
D) Evaporation
E) Distillation
14. What method can be used to separate colored pigments from a solution?
A) Distillation
B) Chromatography
C) Decantation
D) Evaporation
E) Filtration
15. What is required for sublimation to be used in separating mixtures?
A) One component must be magnetic
B) Both substances must be soluble
C) One component must go from solid to gas
D) Both components must be liquids
E) The mixture must be homogeneous
16. What method separates insoluble solids from liquids?
A) Decantation
B) Sublimation
C) Filtration
D) Distillation
E) Chromatography
17. The paper chromatography technique works because of differences in:
A) Temperature
B) Magnetism
C) Solubility and movement through the medium
D) Particle size
E) Density
18. Which separation technique is typically used in water purification plants?
A) Sublimation
B) Chromatography
C) Distillation
D) Filtration
E) Crystallization
19. In fractional distillation, the mixture is separated into parts called:
A) Phases
B) Layers
C) Compounds
D) Fractions
E) Solutes
20. Which of the following techniques would best separate a mixture of sawdust and water?
A) Filtration
B) Decantation
C) Evaporation
D) Distillation
E) Crystallization
- Questions on States of Matter
- Questions on Physical Change
- Questions on Mixtures, Homogeneous and Heterogeneous Mixtures
Answer Key with Explanations
1. D) Magnetism – Iron is magnetic and can be separated from non-magnetic sand.
2. A) Filtration – Separates insoluble solids from liquids using a filter.
3. C) Evaporation – Boils off the water, leaving salt behind.
4. C) Boiling points – Distillation relies on differences in boiling points.
5. B) Decantation – Oil and water separate due to different densities; oil floats and can be poured off.
6. D) Chromatography – Separates components of mixtures like inks and dyes based on solubility.
7. B) Filtration – Sand is insoluble and can be filtered out of water.
8. D) Separate mixtures by density – Centrifugation spins mixtures rapidly, causing denser substances to settle.
9. B) Liquids evaporate, leaving behind solids – Crystallization is often used to purify solids.
10. C) Difference in density – In decantation, denser materials settle at the bottom.
11. D) Distillation – Alcohol and water have different boiling points; distillation separates them.
12. D) Evaporation – Removes a liquid by heating, leaving solids behind.
13. A) Decantation – Involves careful pouring of liquid away from a settled solid.
14. B) Chromatography – Used to analyze and separate colored substances.
15. C) One component must go from solid to gas – Sublimation occurs when a solid turns directly into gas.
16. C) Filtration – Removes solid particles suspended in a liquid.
17. C) Solubility and movement through the medium – Paper chromatography separates substances based on how they travel through the paper.
18. D) Filtration – Common in removing solids from water in treatment plants.
19. D) Fractions – Fractional distillation separates mixtures into components called fractions.
20. A) Filtration – Sawdust is insoluble and can be filtered out of water.
Share Online!
